Table of Contents
Advertisement
min.
min. 200 cm 2
38 mm
min.
38 mm
CONTROL PANEL
Temperature indicator LED
1
Alarm light
2
FastFreeze indicator
3
FastFreeze button
4
Temperature regulator
5
ON/OFF button
SWITCHING ON
1. Insert the plug into the wall socket.
2. Touch the temperature regulator button if all
LED indicators are off.
SWITCHING OFF
Keep touching the temperature regulator button for
3 seconds.
All indicators light off.
8
DOOR REVERSIBILITY
Please refer to the separate document with
instructions on installation and door reversal.
min.
200 cm 2
1
1
TEMPERATURE REGULATION
To operate the appliance, touch the temperature
regulator until the LED corresponding to the
required temperature lights up. Selection is
progressive, varying from 2°C to 8°C.
Recommended setting is 4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any time you
touch the temperature regulator, the setting moves
by one position. The corresponding LED blinks for
a while.
2. Touch the temperature regulator until the
CAUTION! Refer to the installation
instructions for the installation.
CAUTION! At every stage of reversing
the door protect the floor from
scratching with a durable material.
2
2 3
5
4
4
3
required temperature is selected.
The set temperature will be reached
within 24 hours. After a power failure
the set temperature remains stored.
Advertisement
Table of Contents
