12. Warranty conditions PRODUCT DESCRIPTION Balancing valves Fig.221 are globe valves with threaded connections and an oblique body. They are used for medium flow control. The medium flows in the direction indicated on the valve. Differential pressure measurement takes place in measuring orifice. The advantage of this solution is, inter alia, the possibility of direct flow measurement.
Pressure tap CuZn36Pb2As + EPDM Max. temperature 120°C Fittings manufactured by ZETKAMA, including balance valves, have a permanent marking in accordance with the requirements of the PN-EN19 standard. Marking facilitates technical identification and includes: • nominal diameter DN (inch), •...
In case that operating conditions exceed these requirements, e.g. in the case of aggressive or abrasive mediums, a user should make an inquiry to the manufacturer before ordering. Operating pressure should be adjusted to the maximum temperature of the medium, as shown below. Balancing valve Fig. 221 H (brass) Acc. to EN 1092-2 Temperature [º C]...
Inspection frequency should be determined by the user. 8. MAINTENANCE AND REPAIR The balancing valves fig. 221 do not require any maintenance provided that they are used in accordance with their intended use. Before taking up any maintenance actions, make sure the flow of medium in the pipeline was cut off, the pressure was reduced to ambient pressure, medium was removed and the system was cooled down.
Kv values for various settings for the valve Fig. 221 version H (brass): Type Body material Valve flow Kv coefficient [m Wheel position 1,00 2,71 2,48 4,52 5,13 7,07 1,27 3,55 3,35 6,50 7,76 9,67 1,43 3,88 3,91 7,72 9,32...
12. Warranty conditions ZETKAMA grants warranty for proper operation of its products, provided that they are installed in accordance with the instruction manual and operated in accordance with the technical specifications and parameters described in the ZETKAMA data sheets. Warranty period is 18 months from the date of installation, but not longer than 24 months from the date of sale.