Download Print this page

Dewenwils HODT13F Instruction Manual

Outdoor light sensor countdown timer with lighting program

Outdoor Light Sensor Countdown Timer

with Lighting Program

SKU: HODT13F

[Instruction Manual]

Thank you for your purchase.

Please contact us if you have any questions.

We will get back to you within 24 hours.

Email: support@dewenwils.com

Please attach your Order ID so that

we can serve you better.

Table of Contents

Need help?

Do you have a question about the HODT13F and is the answer not in the manual?

Page 1 Outdoor Light Sensor Countdown Timer with Lighting Program SKU: HODT13F [Instruction Manual] Thank you for your purchase. Please contact us if you have any questions. We will get back to you within 24 hours. Email: support@dewenwils.com Please attach your Order ID so that...
Page 2 WARNING To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions. 1. The timer must be mounted in a vertical position with the outlets facing downward and at least 2ft above the ground level. Note: The lighting program is suitable for those traditional tungsten lamps or LED light strings only, NOT for those light strings built-in lighting programs...
Page 3 1. Timer dial: 2 to 8 hours or dusk to dawn and daily repeat function. 2. MODE: To select one of the following light set programs. on→flash/fade→flash→chase 3. Sensor: Sensor will turn timer on at dusk and off at dawn. 4.
Page 4 WARNING：The timer has 10 heat emission holes on the back,please do not hang it upsides down in rainy day in case of water pouring. Specifications Input Voltage: - 125VAC,60Hz. Max Power Rating For Each Receptacle: - 125V, 60Hz, 337.5W, 2.7A. Cord: - SJTW 18/3 AWG.
Page 5 One Year Limited Warranty DEWENWILS warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase. Warranty is void if damage is caused by misuse or improper installation.