Eu Declaration Of Conformity; Faults And Damages - i.safe MOBILE IS-HS1.1 Quick Start Manual

for any data or other loss and direct or indirect damages caused
by any improper use of this headset.
EX-SPECIFICATIONS
The IS-HS1.1 is a headset suitable for use in potentially explosive
atmospheres in accordance with directives 2014/34/EU and
2014/53/EU, as well as the IECEx scheme.
It is approved as an accessory device. Ex-marking see type
examination certificate of the corresponding device. Compatible
devices can be found at www.isafe-mobile.com.

EU DECLARATION OF CONFORMITY

See compatible device.

FAULTS AND DAMAGES

If there is any reason to suspect that the safety of the headset has
been compromised, it must be withdrawn from use and removed
from any ex-hazardous areas immediately. Measures must be
taken to prevent any accidental restarting of the headset.
The safety of the headset may be compromised, if, for example:
malfunctions occur.
the housing of the headset shows damage.
the headset has been subjected to excessive loads.
the headset has been stored improperly.
markings or labels on the headset are illegible.
It is recommended that a headset which shows or which is
suspected of faults and damages is returned i.safe MOBILE
GmbH for inspection.
i.safe MOBILE
5