Advertisement
3.
At this point, the console can be used for Read commands. However, unlike the ST
Configuration App, the UART is an unsecured interface. In this case, you must elevate
your authorization permission for an Execute command. The SECAUTH command
will have to be executed to elevate your permission level. This elevation will remain
persistent until the module is reset or powered off.
•
The following will need to be executed to elevate your permission with the
default password "gst150"
•
AT+SECAUTH=1,gst150
ADVANCED DEVELOPMENT AND CUSTOMIZATION
With the ST150M Development Kit connected and communicating, you can now begin
development and integration with your own design. This kit provides you with various
examples for interfacing applications and peripheral sensors with the ST150M. This
Development kit also has Arduino Uno Rev3 form factor connectors for you to connect to
other development boards and utilize your existing design.
For further explanation of how to get started with software design and integration of the
ST150M with your design, please refer to the ST150M User Manual and the ST150M BLE
Software Design guide.
Globalstar can provide Gerber files, hardware schematics and source code for all apps and
nRF52840 firmware via our GitHub repository. Login details and further instructions will
be provided in separate documents.
11
Please visit
Globalstar.com/support
THIS QUICKSTART GUIDE IS SUBJECT TO CHANGE WITHOUT NOTICE
© 2022 Globalstar. All rights reserved.
All trademarks, service marks, trade names, trade dress, product names and logos appearing
in this Quick Start Guide are the property of their respective owners.
12
for the latest version of the Quick Start Guide.
9150-0151-01 R-2
Advertisement
