Pioneer AVIC-F500BT Operation Manual page 9

Introduction
Notes for internal memory
Before detaching the battery pack
If the internal battery is detached or dis-
charged, the memory will be erased and must
be reprogrammed.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
= For more detailed information about the
items to be deleted, refer to Returning
the navigation system to the default or
factory settings on page 104.
Resetting the navigation system
Press RESET button only under the following
conditions:
! Prior to using this product for the first time.
! If the product fails to operate properly.
! If there appear to be problems with the op-
eration of the system.
! When adding/removing additional pro-
ducts that connect to the navigation sys-
tem.
! If your vehicle position shown on the map
with a significant positioning error.
1 Turn the ignition switch OFF.
2 Detach the navigation unit from the
cradle.
3 Press RESET button with a pen tip or
other pointed instrument.
RESET button
Chapter
01
9
En