Delta-T Devices SWT5 User Manual page 30

4. Pull up the syringe until the
spacers snap in.
The Tensiometer water now is
degassing.
Reassembling
1. Take off the tubes from the
shaft.
When removing the syringe
from the sensor body take care
to avoid damaging the pressure
transducer!
30  Service and maintenance
Leave both syringe assemblies
for at least 2 hours (the longer
the better).
The piston must not snap in
as this might
pressure transducer!
2. Hold the syringe and the
syringe piston securely. Bear in
mind there is still vacuum inside.
Press in the spacers and slowly
release the piston.
SWT5 User Manual v2
damage the