Advertisement
Working in hazardous areas, the safety of personnel and plant depends on complying with all relevant safety regulations.
Staff working on assembly and maintenance,therefore have a particular responsibility. They require precise knowledge
of the applicable standards and regulations. These instructions give a brief summary of the most important safety measures.
It supplements the corresponding regulations which the staff must study.
Only use the series full plastic explosion-proof (emergency) fluorescent light fitting for its intended purpose.
The series full plastic explosion-proof (emergency) fluorescent light fitting are not suitable for hazardous areas Zone 0!
Incorrect or impermissible use or non-compliance with these instructions invalidates our warranty provision.
No changes to the device impairing its explosion performance are permitted.
Only use the full plastic explosion-proof (emergency) fluorescent light fitting if they are clean and undamaged.
Any damage can invalidate the Ex-performance.
Observe the following during installation and operation:
National safety regulations;
National accident prevention regulations;
National installation regulations(e.g.GB3836.15, IEC 60079-14);
Generally recognized technical regulations;
Safety guidelines in these operating instructions;
Characteristic values is given on the series full plastic explosion-proof (emergency) fluorescent light fitting.
Conformity to standards
The series full plastic explosion-proof (emergency) fluorescent light fittings are designed, manufactured and tested in
accordance with ISO 9001 standards.
The series full plastic explosion-proof (emergency) fluorescent light fittings is conformity to the directive 94/9/EC,ATEX and
the following standards:
IEC60079-0 - 2007
EN60079-0 - 2009
IEC60079-1 - 2007
EN60079-1 - 2008
IEC60079-7 - 2006
EN60079-7 - 2007
IEC60079-5 - 2007
EN60079-5 - 2007
IEC60079-18 - 2004
EN60079-18 -2005
IEC61241-0 - 2004
EN61241-0 - 2006
IEC61241-1 - 2004
EN61241-1 - 2005
Applicable scope
The series products are suitable for using in the explosive hazardous areas zone1, zone2 and the dust hazardous zone
21 and zone 22, work as illumination; The product may be used indoors and outdoors.
Main Technical Data
The code
of
abbreviat
of manufacture
The year um
n
ber
of product
The code of product type
The code of enclosure specification
The quantity of lamp
SAFETY INSTRUCTIONS
Z 08 6
/
ed name
developed
:5,6
tube:1,2
Purpose of these instructions
-
+CZ0804
The rated current of Explosion-proof
fuse module: Up to 6.3A
The model of Explosion-proof fuse
module (No matching not noted)
The code of emergency light fitting:
YJ (The non-emergency light fitting
not noted)
AC230V
The power of single lamp
18W - 36W
-1-
tube:
Advertisement
