I Have Trouble Launching/Using Apps - Samsung UN40N5200AF E-Manual

The problem
The connected device is
not displayed.
The TV audio is not being
played through the
receiver.

I Have Trouble Launching/Using Apps

When apps aren't working, these steps may help resolve the problem.
The problem
I launched an app, but
it's in English. How can I
change the language?
My application is not
working.
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC)
● Settings General
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the device is
connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI cable has
been disconnected, please scan for the device again.
Connect an optical cable to the TV and the receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that supports
ARC.
Languages supported by the app may be different from the user interface language. The ability
to change the language depends on the service provider.
Check with the service provider.
Refer to the Help section on the application service provider's website.
Try this!
and see if Anynet+ (HDMI-CEC)
External Device Manager
Try this!
- 100 -
has been set to On.
Anynet+ (HDMI-CEC)