Polaroid PLANC080 User Manual

PLANC080
Active Noise Cancelling
Wireless Headphones
User Guide
Have you got everything?
1 2
1. ANC switch
2. Micro USB Port
3. Microphone

Operation

Power on and pair with a Bluetooth device
Press and hold the
flash red/blue, indicating it is ready to pair with a Bluetooth device. Turn your smart phones
Bluetooth and select "PLANC080" on the list of available devices. Once successful, you will
hear a notification sound and the LED status indicator will light up blue. Music from your
smart phone will now be played through the headphones.
• Press the
song.
• Press the
• Press the

Bluetooth call function

Once successfully connected to your smart phone, you can answer/reject incoming phone
calls. Press the
button to reject the call. Press the
recent phone number.
• Press the
• Press the

AUX mode

Connect a 3.5mm audio cable to the AUX In port of the headphone and the other end to your
audio device. The headphone will automatically switch to AUX mode and power off to save
battery life.

ANC (Active Noise Cancelling Mode)

Slide the ANC switch to turn the headphone into ANC mode. Slide the ANC switch back to
return to normal mode.
NOTE: ANC mode will use more battery than normal mode.

Power off and charging

When the battery is low, an alert tone will be heard and the LED indicator will turn red
indicating it is low battery. Connect the supplied micro USB charging cable to the micro
USB port and the other end of a USB power source. The LED status indicator will light up red
during charging and disappear when fully charged.
Press and hold the
indicator will turn off and a voice notification will be heard. If not paired with a Bluetooth
device, it will automatically power off after 5 minutes.
Your new product is ready to enjoy!
Now sit back and relax... your new product is automatically covered
Have questions?
We've got answers.
Visit us at tempo.org/support or
give us a call at 1300 886 649

Buttons on the Headphones

3 4 5
4. AUX In Port
5. LED Status Indicator
6. - Button
(Function) button on the headphone. The LED status indicator will
- button to decrease the volume level. Press and hold to play the previous
+button to increase the volume level. Press and hold to play the next song.
(Function) button to play/pause the song.
(Function) button to answer in an incoming call. Press and hold the
- button to decrease the volume level.
+ button to increase the volume level.
(Function) button to power off the headphone, the LED status
Well done, you made it.
by a 1-year warranty. How nice!
Distributed by:
Tempo (Aust) Pty Ltd
PO Box 132,
Frenchs Forest,
NSW 1640
D
E
6 7
7.
8.
(Function) button twice to redial the most
Polaroid, Polaroid Color Spectrum and Polaroid Classic
Border Logo are trademarks of PLR IP Holdings, LLC,
used under license . PLR IP Holdings, LLC does not
manufacture this product or provide any Manufacturer's
Warranty or support.
©2022 All rights reserved.
A. ANC Wireless Headphones
B. 3.5mm Audio Cable
C. Micro USB Charging Cable
D. User Guide
E. Warranty Certificate
+
8
(Function) Button
+ Button