Advertisement
A macro is a prerecorded sequence of keystrokes and button presses executed with precise timing. By
Macro Manager
assigning a macro to a button, you can execute complex combinations with ease. The device allows you to
◼
create, delete, import, and export your customized macros. You may assign an existing macro, or record a
new macro and assign it to the button.
Click the Macro Manager button, and the Macro pop-up box will appear.
(1) Click the button and name the macro you are about to record. Confirm the name by pressing the
1. Create a Macro
Enter key on your keyboard.
(2) Set the delay time between events:
-Recording: The delay between events are registered as they are recorded.
-Fixed: Use a predefined time (shown in millisecond) for the delay.
-Ignore: Omit all the pauses between keystrokes and button presses.
(3) Click the Start button to record all your keystrokes and mouse button commands into the macro.
When done, click the Stop button to complete this recording.
(4) Click the Cancel button if you want to discard this recording, or the Ok button to confirm this
recording. Successfully recorded macros can be found on the Macro Select drop-down list.
(5) For any recorded macro, you may delete or adjust its event sequences, or add new events by
initiating another recording session.
Each Macro key can record 64 actions (32 keys).
Note:
Select the macro to be deleted and click on the Trash Bin button. A
2. Delete a Macro
Confirmation message pop up window will appear. Click the Ok
button to delete the macro.
To adjust the delay time, double-click the field to be revised and enter the new value. Some
3. Edit Delay
8
Advertisement
