Advertisement
Quick Links
Dynacord | EB DPC
EB DPC
www.dynacord.com
The EB DPC is an optional button for installation in the
DPC 8000 series call stations. For more information,
see the DPC operating instructions and the IRIS-Net
documentation.
Parts included
No.
Component
1
Button element with cover
1
Preconfigured 4-pin connecting cable
1
Label sheet
1
Technical information
Installation/configuration notes
Labeling
1.
Remove button (1) from holder (2)
2.
Remove red undersection (3) from button cover (5)
with a sharp object (such as a knife)
3.
Insert label sheet (4) into button cover (5)
4.
Re-assemble the button element, including the label
sheet, and mount in the holder
▪ Transparent cover – reliable method of preventing
accidental actuation
▪ Installed LED – optical visualization with maximum
efficiency and operational reliability
▪ Internal monitoring – the feed line is monitored for
short-circuits and interruptions
Advertisement
Related Manuals for Dynacord EB DPC
Summary of Contents for Dynacord EB DPC
- Page 1 ▪ Internal monitoring – the feed line is monitored for short-circuits and interruptions The EB DPC is an optional button for installation in the DPC 8000 series call stations. For more information, see the DPC operating instructions and the IRIS-Net documentation.
- Page 2 2 | EB DPC Assembly (based on DPC 8015) Disconnect the call station from all connectors Unscrew call station baseplate (1) Unplug the connection cable from CN1 plug connector (2) Prepare installation location (3). Use a sharp object (knife, scriber, or similar) to carefully punch through and cut out the pre-cut rectangle on the back housing.
- Page 3 3 | EB DPC Represented by: Germany: EVI Audio GmbH Sachsenring 60 94315 Straubing Germany www.dynacord.com © Bosch Security Systems 2013 | Data subject to change without notice Document Number | Vs1 | 19. Mar 2013...