Advertisement
2 | EB DPC
Assembly (based on DPC 8015)
1.
Disconnect the call station from all connectors
2.
Unscrew call station baseplate (1)
3.
Unplug the connection cable from CN1 plug
connector (2)
4.
Prepare installation location (3). Use a sharp object
(knife, scriber, or similar) to carefully punch through
and cut out the pre-cut rectangle on the back
housing. Perform any follow-up work that may be
required to the installation location (e.g. filing)
5.
Mount the button into the installation location and
press down evenly
6.
Depending on whether the right/middle/left
installation location will be used, plug ribbon cable
(4) into plug connector CN201/CN202/CN203 on the
circuit board
7.
Plug connecting cable (2) back into CN1
8.
Re-attach the call station baseplate
9.
Attach the connections
10. Configure the button in IRIS-Net
Ordering information
EB DPC
Order number
F01U101089
Advertisement
