Invision MX200 Instruction Manual

www.InvisionTechnology.co.uk
Parts List:
Butterfly nut Threaded rod Locking plate
NB NG P E E N TE: N T T
This product is packed with the faceplate at a 45° angle to fit smaller packaging and reduce environmental waste.
Please rotate the faceplate 45° clockwise before mounting your monitor.
P E E N TE: c pl o on h h gh nc by
no l n n h yo c n ll b h l y fo
ov n
Severe personal injury and property damage can result from improper installation or assembly. Please read the following warning carefully before beginning.
• If you do not understand the instructions or have any concerns or questions, please contact us or a competent installer.
• Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts, please contact us at Invision for assistance.
• This product fits most VESA compliant 19"-32" LCD/LED monitors to a maximum weight of 9kg (19.8lbs).
• For safe installation, the desk you are mounting it to must support minimum 3 times the weight of the total load (the mount, plus the monitor and all accessories weight).
• Do not use this product for other than the original design purpose.
• This product contains moving parts, please use with caution.
• When installing monitor take care not to damage electrical wiring or power source.
• Important - mains and data cables must be free from twisting and/or shearing.
• The manufacturer disclaims any liability for the modifications, improper installation or installation over the specified weight range. The manufacturer will not be liable for any damages arising from the use of, or
inability to use the product.
• This product is designed for indoor use only, use of this product outdoors could lead to product failure and severe personal injury.
• This product contains a high pressure gas piston This mechanism is not user serviceable and any interference could result in injury or damage. Please dispose of with caution.
• In order to ensure the performance of the gas piston it is recommended to fully extend the arm several times per month.
Lets Get Started!
If you require assistance please contact us at: help@InvisionTechnology.co.uk
English
Invision MX200
Ergonomic Gas Assisted
Monitor Arm
Instruction Manual
VESA Compliance 75x75mm & 100x100mm
Recommended Screen Sizes 19" - 32"
Integrated Cable Management
Load Capacity 2 - 9kg (4.4 - 19.8lbs)
To receive large format PDF instructions
please email help@InvisionTechnology.co.uk
Tools List:

Important:

1. Check the box contains all the items in the Parts List.
2. Check the screens VESA mounting measurements and
monitor weight.
3. Please read the instructions fully and plan how to mount
your monitor.
4. You may need additional tools: A drill will only be needed
if you are bolting it through a desk and a screwdriver is used
to secure the monitor to monitor arm.
B EN
gn n y n l l fo c o ov Th
ny y o co ho ny n n
WARNING!
1
45
v20221024 2