Precaster ProRange-1200 Quick Start

Caution
1. This is a Class 1 laser tool ; laser radiation is emitted from this product
and is manufactured to comply with IEC 60825-1:2014,EN 60825-1:2014,
and CRF21, parts 1040.10 and 1040.11.
2. Using controls and adjustment procedures other than those specified
herein may result in laser radiation exposure.
3. Never stare directly into the beam or aim the laser beams at others.
4. he product contains semiconductor laser diodes with wavelengths of
905 nanometers.

In the Box

■ Laser Rangefinder
■ Battery Cap /w ¼" Thread
■ CR2 Battery
1200YD / 1100M

Overview

1. Function Button : Access the device settings for mode selection,
unit selection, and Bluetooth.
2. Measure Button : Used to take measurements in all modes of oper-
ation.
3. Observation Window / Laser Emitted Window
4. Laser Receiving Window
5. Eyepiece
6. Battery Door
Specification
1. Product Model : ProRange 1200
2. Measuring Range : 5-1200yd / 5-1100m
3. Accuracy : ±0.3% (D>500m), ±0.5% (D<500m)
4. Amplification : 6 X
5. Caliber : 23mm
6. Pupil Distance : 17mm
7. FOV : 6 degrees
8. Measuring Speed : 0.3 Seconds within 1200 yards / 1100 meters
9. Angle : ±89 degree
10.Waterproof : IP54
11.Dimension : 102*35*69mm
12.Weight :160g
■ Carry Case
■ Safety Strap
■ QuickStart
1 2
3
4
6

LCD Screen Information

1. The LCD screen displays a range of information to help you take accu-
rate measurements with the rangefinder. Here are some key terms and
their meanings:
2. YD : Indicates the selected unit of measurement is yards.
3. mm/M : Displays the slope in metric mode.
4. in/FT : Displays the slope in imperial mode.
5. PCT : Indicates the slope raised in percentage.
6. DEG : Indicates the angle measurement in degrees.
7. AD : Indicates the actual distance measurement.
8. 1, 2, 3 : These numbers are displayed to guide you through the
sequence of measurements in all modes.
9. HD : Indicates the horizontal distance measurement.
10.H : Indicates the height measurement.
11.ID : Indicates the interval distance measurement.
12.SD : Indicates the slope distance measurement.

Applications In A Glance

The rangefinder is equipped with several measuring modes to suit differ-
ent needs.
To help you choose the appropriate mode for your needs, you can refer to
the sheet below which summarizes the key features and functions of each
mode, making it easy for you to find the relative data in each mode.
5
H
HD
Modes Symbol Initial
Actual AD AD HD
Distance
2P Height 2PH H DEG #1
3P Height 3PH H AD1
Interval
ID ID AD1
Distance
Slope SD SD AD1
Distance
*Values may be displayed by the master unit, with M(Meters) used for mm/M and FT (feet) or YD (Yard)
used for in/FT measurements.
H
Related Data To the Initial And The Loop
H DEG mm/M* PCT
in/FT*
#1 PCT #1 DEG #2 #2 PCT #2 AD1 AD2 HD
mm/M* mm/M*i
in/FT* n/FT*
HD
AD2 DEG AD2
AD2 H mm/M*
PCT
in/FT*