Qbic Technology TD-1070 Quick Start Manual

Quick Start Guide
This quick guide will help you go through installa�on quickly
TD-1070
Touch Panel PC
Support site QSG download link
Contents
Panel PC DC Power Adapter
(TD-1070)
M3
Bracket Tape M3 screw *1
Bracket Kit
Indica�on
1
2 3
4 6
5
MIC Front LED USB 2.0
1 5 9
Side LED
2 Optical Sensors 6 USB Type C for ADB
10
Camera Reset Button RJ45 / PoE+(36-57Vdc)
3 7 11
Display Audio Jack Micro SDHC
4 8 12
Installa�on
1. Cable connec�on
STEP 1
Connect cables. Device will
power on when DC/PoE+
is inserted.
US EU UK AU
Power Plug
(Provided by region)
M2
2. Tape Mount
STEP 1
A�ach tape on the
back of bracket
I/O Cover M2 screw *2
3. Surface Mount
STEP 1
7 8 9 10 11 12 13
Install bracket
on surface
(screws not included)
14
NOTICE:
◎ This Panel PC is also compa�ble with VESA moun�ng (75mm x 75mm). It is recommended
DC 12V
13
to secure with M3 screw. The suggested length of the M3 screw is the thickness of
VESA moun�ng bracket plus 8mm(Screw not included).
Kensington
14
Lock Slot
◎ Please ensure the moun�ng surface is clean and smooth before using the tape.
◎ M2 / M3 screw Torque<2 kgf-cm
◎ Installa�on height: <2M
STEP 2 STEP 3
Install I/O cover Fix 2* M2 screws
STEP 2 STEP 3 STEP 4
Place the bracket on the Fasten M3 screw*1 to Fix the Panel PC
back side of Panel PC secure the bracket and on the surface
back cover using tape
30°
STEP 2 STEP 3
Mount the Panel PC on Fasten M3 screw*1 to
the bracket secure the bracket
and back cover
30°