Introduction; Special Notes On The Touch Screen; Physical Connections; Decoder Pro Model Rear Panel Label - Vela ArgoNavis Installation And User Manual

ArgoNavis QA/QC Decoder

Introduction

Vela Research is pleased to introduce the ArgoNavis Decoding System. The ArgoNavis
provides advanced, multiformat decoding and playback capabilities supporting MPEG-2,
h.264 (AVC) and other video compression technologies contained within many different
multiplexed containers, such as MPEG-2 TS, MPEG-2 PS, MP4 and QT formats.

Special Notes on the Touch Screen

If equipped with a Touch Screen, after unit power up, please allow several seconds for
the Touch Screen drivers to load prior to 'touching' the Touch Screen.
The Touch Screen is controlled via USB. Included with the Touch Screen is a USB cable.
Connect the USB cable from the Touch Screen to any available USB connector on the
ArgoNavis unit.

Physical Connections

Note that the ArgoNavis platform can be configured as an encoder or decoder and the
inputs and outputs will be enabled/disabled based upon the configuration of the unit.
For example, an encoder only unit will have only the inputs enabled. Likewise, the
decoder only configuration will have only the outputs enabled.
The ArgoNavis system comes in three different input/output configurations:

Decoder Pro Model Rear Panel label

4000-xxxx-3 ArgoNavis Decoder Pro
A B
A – HD/SD SDI IN
B – HD/SD SDI OUT
HDMI IN
Page | 4
MULTI I/O
PORT
HDMI OUT
User Manual and Installation Guide