Enforce Field Ordering For Sd Source; Enable Vanc Insertion; Use Drop Frame For Timecodes; Use Gop Header Time Code On Location Bar - Vela ArgoNavis Installation And User Manual

ArgoNavis QA/QC Decoder User Manual and Installation Guide

Enforce Field Ordering for SD Source

This setting swaps the Field Ordering on the physical outputs and can be used to find
'Field Ordering' issues that result in a 'jittery' output. This setting should be used in
conjunction with:
1. Deinterlace Mode SD set to 'Renderer'
2. Enable VANC Insertion 'Checked'

Enable VANC Insertion

When 'checked' this 608/708 VANC data is inserted on the specified line.
HD VANC Line
Specifies the line to insert the CC data. Valid values are 9 through 16.
SD VANC Line
Specifies the line to insert the CC data. Valid values are 12 through 16.

Use Drop Frame for Timecodes

When 'checked' this drop frame timecodes are used for the trackbar and Time Code
Overlay.

Use GOP Header Time Code on location bar

When 'checked' the GOP Header timecode is used on the trackbar. If 'unchecked'
timecode starts from 00:00:00:00

AC3 Bitstream Out Enabled

When 'checked' this setting bypasses decoding AC-3 and outputs the AC-3 embedded in
the SDI.
Page | 24