Download
Share
Print this page
  1. Manuals
  2. Brands
  3. KlipXtreme Manuals
  4. TV Mount
  5. KTM-500
  6. Manual

KlipXtreme KTM-500 Manual

Tabletop tv mount
Hide thumbs

Advertisement

Quick Links

Download this manual
KTM-500
Introduction:
Thank you for purchasing the KTM-500 tabletop TV mount. This product is shipped with all
proper installation hardware and components. Upon opening the box, make sure that none
of these parts are missing and/or damaged before beginning installation.
1. Hardware kit
Image
Label
A
B
C
Tabletop TV mount
for flat and curved TVs.
User guide.
Item
Tempered glass
Bottom support pillar
Top support pillar
Quantity
1
1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the KTM-500 and is the answer not in the manual?

Questions and answers

Related Manuals for KlipXtreme KTM-500

Summary of Contents for KlipXtreme KTM-500

  • Page 1 KTM-500 Introduction: Thank you for purchasing the KTM-500 tabletop TV mount. This product is shipped with all proper installation hardware and components. Upon opening the box, make sure that none of these parts are missing and/or damaged before beginning installation.

  • Page 2: Tools Required For Installation

    • Safety measures must be practiced at all times during the assembly of this product. Use proper safety equipment and tools for the assembly procedure to prevent personal injury. • KlipXtreme does not warrant against damage caused by the use of any Klip Xtreme mounts Plastic cover...
  • Page 3 2. Use the screwdriver to attach the M6x25 (N) screws to the glass base (A), the plastic plate 4. Attach the right TV plate (E) to the left TV plate (D) with the M6x6 screws (L). (H), and the bottom support pillar (B) using the M6 nuts (Q) and the washers (P). 5.
  • Page 4 6. Attaching the TV mounting arms to the back of the screen 7. Take the TV to the assembly area. Once the TV mounting arms are tightened to the TV, proceed to place it on the TV stand selecting the height you wish to view. a Place your flat or curved TV side down on a soft, even surface, and identify the threaded mounting points that are located on the back of the unit (VESA pattern).

  • Page 5: Technical Specifications

    9. Insert the cable clips (J) to the support pillar. Route the TV cable along the cable Technical specifications management system, leaving enough slack to allow for proper movement. KTM-500 Features Mount type Tabletop TV mount TV type and size...
  • Page 6 Notes...