Advertisement
How to set duration for each run
1. Press "RUN" till the screen shows 0
2. Press
to shift to the next blank and
3. Press
to enter.
For example: To set 10 sec run duration
1. Press
2. Press
How to set running time
1. Press "START" till the screen shows
has been programmed.
2. Press "START" once and screen shows
st
adjust the 1
starting time.
3. Press "START" till once the screen shows
st
the 1
running time has been programmed (1 P) and whether to proceed to the next
programme (02).
4. Press "START" once and screen shows
st
adjust the 1
starting time.
5. Press "START" till once the screen shows
the two running time has been programmed (2 P) and whether to proceed to the next
programme (03).
If you wish to proceed to the next programme,
6. Follow steps 2-3 repeatedly to programme the starting time for each run. A maximum
of 12 runs can be programmed.
If you do not wish to proceed to the next programme,
7. Press "START" twice. The screen would return to the clock.
0
thrice and
once.
to enter.
_
_
1
_
_
2
0
0
to adjust the time.
0
0
1
0
0
P
. This means that no time
_
_ . Using
P
0
2
. This means that
_
_ . Using
P
0
3
. This means that
&
&
Advertisement
