imec PRO D579 Instruction Manual

Instruction Manual
Introduction - Getting to know the 3 buttons
Screen
Main Function: Set Time
Secondary Function: To
shift to the next blank
How to set the 24 hr clock
1. Press "CLOCK" till screen starts to blink
2. Adjust time using
3. Press "CLOCK" to shift to the next blank and use
4. Press "CLOCK" and "RUN" together and hold till the colon flashes. Clock is set.
How to read the 24 hr clock
1. Screen shows clock in hour/min.
1 2 : 4
This reads 1245
2. Press "CLOCK" again and screen shows min/sec
4 5 : 2
This reads 45 min 23 sec
3. Press "CLOCK" again to return to hour/min screen
Clock Run
Main Function: Set duration
for each run
Secondary Function: To set
the figure for each blank
.
5
3
Start
Main Function: Set running time
Secondary Function:
"Enter/Accept"
to adjust the time.