The Control Panel - Sharp QW-HS25F44DI-DE User Manual

7. THE CONTROL PANEL

Pressing the On/Off button (4) will switch
the machine on and off. The LED light
remains lit as long as the machine is on.
Select a suitable programme by pressing
the programme button (5).
Press start/pause button (6) to start the
programme. The was LED light turns
on and the remaining time indicator (7)
shows the time remaining for that specific
programme.
If you open the door of the machine whilst a
programme is running, the programme will
pause. During this pause the programme
number and duration are shown alternately.
Programme progression can be monitored
by the LED indicators (7). These highlight
whether the programme is in the wash,
rinse or dry stage. The machine will be
silent for approximately 40-50 minutes
during the drying stage.
NOTE: By pressing the half load button
(3), three different options can be selected:
Upper Basket, Lower Basket and both
Baskets. Repeatedly press the half load
button until the LED indicator shows the
mode required - the LED shows which area
of the machine will be washed.
NOTE: Pressing and holding down
the Half Load button (3) for three seconds
activates the 'Tablet Option'. Use this
specific option when using combined
detergents that contain salt and rinse aid.
NOTE: The hygiene setting can
be pressed in relation to other washing
programmes. This setting alters the wash
temperature and also the washing time
required.
9
NOTE: If the rinse option is selected,
an extra rinse will be added to the selected
programme.
NOTE: To reduce the duration of
the washing, select Extra Fast option by
presiing Extra button until its lamp turns on.
This option washes the dishes with more
pressure and provides more economical
water usage.
NOTE: When Extra Silent option is
activated by pressing Extra button until its
led is on, the dishes are washed with less
pressure, thus provides more sensitive and
silent washing.
NOTE: If you have used any of the
extra features, these will remain active on
the next washing programme. To turn these
features off or change the configuration,
press the relevant button until the indicator
buttons are as required.
NOTE: Child lock can be turned on
by pressing and holding the 'Extra' (1) and
'Half Load' (3) buttons for three seconds.
When Child lock has been activated all
LED lights flash on the machine and "CL" is
shown on the remaining time indicator (7).
To deactivate the setting repeat the above
instructions, all LED lights and "CL" flash
twice and then remain off.
NOTE: You can delay the start of
any programme from one hour up to 19
hours, in one hour intervals. To activate this
feature, press the 'Delay Button' (2) before
starting a selected programme. Press the
button until you have reach the required
delay in hours, press 'Start/Pause Button'
(6). The programme will now start after
the delay time has elapsed. To cancel a
delay, press the 'Delay Button' (2) until zero
appears on screen.
NOTE: If user switches the machine
to off position after selecting the delay time
and the programme has started, delayed
time is cancelled.
NOTE: When the dishwasher salt
needs to be refilled, the 'Salt Warning
EN - 19