Troubleshooting - Jimmy GT306 Instruction Manual

Trouble Shooting
Please check the following issues before sending to designated maintenance departments.
Symptoms
No Steam flow,
indicator light is off
No steam flow, but
indicator light is on
Steam nozzle leaks
The connection of
steam hose leaks
Overflow of water
tank
Water tank deforms
Steam flow is too
small
Noise in steam
hose
yellow substance in
the water tank
25
Possible Causes
Whether power supply is connected
Whether the switch is damaged
Whether thermal fuse is damaged
Steam generator burnt out
Whether steam nozzle is broken
Use the steam nozzle horizontally
Whether the sealing ring is aging
Connection looseness
Water tank is broken
Whether hot water added
Whether other chemicals added
Whether the pipe is blocked with scale
Whether the voltage is too low
Switch damage or heater damage
Whether the steam hose is bent
Steam nozzle is below the horizontal line
during use
The heater generates scale
Solutions
Connect the power supply
Ask a professional for maintenance
Ask a professional for maintenance
Replace the steam nozzle
Please use the steam nozzle up and
down vertically
Replace the sealing ring
Tightten connection of steam hose
Replace water tank
Remove scale with professional
detergent
Use the power supply with a
voltage regulator
Ask a professional for maintenance
Extend the steam hose and lift the
steam nozzle
Clean the scale according to
chapter "Cleaning and Maintenance"