IMPORTANT SAFETY
5. Never operate this appliance if it has a dam-
aged cord or plug, if it is not working prop-
INSTRUCTIONS
erly or if it has been dropped or damaged, or
dropped into water. Return the appliance to
When using electrical appliances, especially when
an authorized service center for examination
children are present, basic safety precautions should
and repair.
always be followed, including the following:
6. Keep the cord away from heated surfaces.
READ ALL INSTRUCTIONS
7. Never use while sleeping.
8. Never drop or insert any object into any open-
BEFORE USING
ing or hose.
9. Do not use outdoors or operate where aerosol
(spray) products are being used or where oxygen
is being administered.
DANGER
—
Any appliance is electri-
10. Unit is hot when in use. Do not let eyes or
cally live even when the switch is off. To reduce
bare skin touch heated surfaces.
the risk of death by electric shock:
11. Do not place the heated unit directly on
any surface or on the appliance cord while it
after using.
is hot or plugged in.
2. Do not use while bathing or in a shower.
12. Never block the air openings of the appliance
3. Do not place or store appliance where it can
or place on a soft surface, such as a bed, couch,
fall or be pulled into a tub or sink.
or towel, where the air openings may be blocked.
Keep the air openings free of lint, hair, and the
4. Do not place in, or drop into, water or other
like. Unplug before storing.
liquid.
13. Do not use an extension cord with this
5. If an appliance falls into water, unplug it im-
appliance.
mediately. Do not reach into the water.
14. Do not touch hot surfaces of the appliance.
WARNING
Use handles or knobs.
—
To reduce the risk of
15. Before plugging in read the information about
burns, electrocution, fi re, or injury to persons:
dual voltage contained in the instruction section
1. This appliance should never be left unat-
of this manual.
tended when plugged in.
16. Do not attempt to touch the housing of your
2. Do not pull, twist, or wrap line cord around
appliance near the straightening plates as it is
appliance.
hot when in use.
3. This appliance should not be used by, on or near
17. Do not use with a voltage converter.
children or individuals with certain disabilities.
4. Use this appliance only for its intended use, as
described in this manual. Do not use attachments
not recommended by the manufacturer.
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This straightening iron is intended for house-
hold use. This unit is designed to operate at
120/240 volts AC. Use on Alternating Current
(50/60 hertz) only.
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this plug
will fi t in a polarized outlet only one way. If the plug
does not fi t fully in the outlet, reverse the plug. If
it still does not fi t, contact a qualifi ed electrician.
Do not attempt to defeat this safety feature.
DUAL VOLTAGE
This straightening iron will automatically adjust
to the proper voltage. Use an adapter plug with
correct confi guration, prior to use in outlet.
TO STRAIGHTEN HAIR
Hair should be clean and completely dried before
using the straightening iron. Plug the iron into an
electrical outlet. Turn on unit. The power indica-
tor light should become illuminated. Allow unit
to heat up for several minutes.
WARNING: The straightening iron's plates will
get very hot within a few seconds and should
not be placed in contact with the skin after
the straightening iron has been turned on.
SAVE THESE
GETTING STARTED
STYLING WITH EASY-GLIDE TITANIUM-
TOURMALINE CERAMIC COATED PLATES
The straightening iron's 3 high heat temperature
settings and Instant Heat technology combine to
The plates of this premium straightening iron
are coated with a combination of the best ma-
provide styling versatility for all hair textures. If
you have fi ne hair, a low temperature will provide
terials for styling. A fusion of titanium, tourma-
the best results. If you have thick, wavy or hard-
line and ceramic evenly distributes heat to
gently style and protect hair from damaging
to-straighten hair, keep the heat setting high. You
can vary the straightening iron's temperature
hot spots. When heated, tourmaline naturally
emits clouds of negatively charged ions that
according to your particular need!
eliminate fl yaways and frizzies and leave hair
STRAIGHTENING BASICS
silky smooth and shiny.
1. Plug the straightening iron cord into any house-
Hair glides easily over the surface of these ultra
hold outlet (120/240V, red light to go on). Press
smooth plates. As you straighten each strand,
ON button. The iron will heat up very quickly. The
you'll achieve a salon-perfect fi nish.
red indicator light will stop blinking and remain
Plates are exceptionally easy to clean, and you'll
on when the iron is ready to use. To turn off, press
discover this combination of technologies leaves
OFF button (red light will go off). Never leave your
your hair silky smooth.
However,
straightening iron on and unattended.
should you fail to turn the unit off, it will shut
Temperature Setting Guide
itself off automatically within 72 minutes.
2. Start with a hair section that is 2" wide and no
Temp. Setting
more than 1/2" thick. Open the iron and place a
Low
hair section between the two hot plates, close to
Medium
the scalp. Trap hair between the plates by fi rmly
squeezing the handles together. While maintain-
High
ing the tension, slowly pull the unit down along
the hair section toward the end of hair. For best
USING INSTANT HEAT, THE 3 HIGH HEAT
results, use a light styling lotion before blow-dry-
TEMPERATURE SETTINGS AND UNIFORM
ing hair. At the end of hair section, release the
pressure on the handle and allow the hair section
This straightening iron features Conair's Instant
to slide out. Repeat process on additional sections
Heat technology.
of hair until you achieve the hair style you desire.
Within this Instant Heat technology there are 3
It may be necessary to repeat process on certain
temperature settings for every type of hair, from
areas, depending on the texture of your hair.
the fi nest to the curliest and most resistant. Se-
Some experience is necessary when learning to
lect the temperature range that's suitable for your
use this straightening iron. After using iron several
hair type to help you create the look you want.
times, you will learn the ideal way to straighten and
style your hair easily.
And that's not all. Conair's professional salon
standards of engineering provide you with a Uni-
form Heat Recovery System that maintains the
straightening iron at a constant temperature.
There is a constant surge of power to ensure that
heat is continuously delivered for optimal styling
results, unlike other units which lose heat during
use. This provides consistent styling power so
that every strand of your hair is set with the same
level of heat and comes out the same way for a
perfect fi nish.
REMOVABLE SILICONE
DEEP SHINE ATTACHMENT
Hair Type
Delicate, thin, easy-to-straighten hair
Your straightening iron includes a removable
Average to thick or treated hair
silicone deep shine attachment. This attachment
will help to provide tension and guide your hair
Thick, wavy or hard-to-straighten hair
as you use the straightening iron. It also eliminates
any gaps, creating silky, smooth strands with
extra shine. To remove or attach the silicone strip,
turn unit off and allow unit to cool. Hold unit
HEAT RECOVERY SYSTEM
fi rmly with one hand; with your other hand, slide
silicone strip away from the iron to detach it.
When attaching the silicone strip, align it with
the slot on the side of the iron and slide silicone
strip into position. Make sure the silicone strip
securely locks into position.
Need help?
Do you have a question about the ProShine CS64 and is the answer not in the manual?
Questions and answers