Before First Use - Ninja Precision Processor Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
29 NEVER operate the appliance without lid
in place. DO NOT attempt to defeat the
interlock mechanism. Ensure the container
and lid are properly installed before
operation.
30 DO NOT expose the container and
accessories to extreme temperature
changes. They may experience damage.
31 NEVER leave the appliance unattended
while in use.
32 DO NOT blend hot liquids. Doing so may
result in a pressure buildup and steam
exposure that can pose a risk of the user
being burned.
33 DO NOT attempt to remove the container
and lid from the motor base while blade
assembly is still spinning. Allow the
appliance to come to a complete stop
SAVE THESE INSTRUCTIONS
5
1-877-646-5288
before removing lids and containers.
34 Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container's contents. Remove the
blade assembly by carefully grasping the top
of the shaft and lifting it from the container.
Failure to remove the blade assembly before
emptying the container can result in a risk of
laceration.
35 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
36 The maximum wattage rating for this
appliance is based on the configuration of
the Dough Blade Assembly and Precision
Processor ™ Bowl. Other configurations
may draw less power or current.

BEFORE FIRST USE

IMPORTANT: Review all 1
Remove all packaging materials from the appliance.
warnings on pages 3–5 Exercise care when unpacking blade assemblies. All blade
before proceeding. assemblies are sharp.
2 The Chopping Blade Assembly is NOT locked in place in
its container. Handle the Chopping Blade Assembly by
grasping the top of the shaft.
DID YOU KNOW?
3 Wash container, lid, and blade assemblies in warm, soapy
• All containers, lids, and
water, using a dishwashing utensil with a handle to avoid
blade assemblies are BPA
direct contact with the blades. Exercise care when handling
free.
blade assemblies, as the blades are sharp.
• Our blades, containers,
4 Thoroughly rinse and air-dry all parts.
and lids are top rack
5 All attachments are dishwasher safe. It is recommended
dishwasher safe.
that the container, lid, and blade assemblies be placed on
the top rack of the dishwasher. Ensure blade assemblies
are removed from their containers before placing in the
dishwasher. Exercise care when handling blade assemblies.
6 Wipe the motor base with a clean, damp cloth.
6
n i n j a k i tc h e n . c o m