Mapping Data Into The Image Table - Hitachi HX-RIO3 Series User Manual

11
UL Filed Power
Field Power
Wiring
Torque
Weight
Module Size
Environment Condition

3.1.6 Mapping Data into the Image Table

Input Module Data
Input Image Value
Bit No Bit7
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
If the input of channel is open or over-ranged, its conversion data will be 0x8000 (-32678)
Supply voltage: 24Vdc nominal, Class 2
Not used, Field Power passes through to the next module
I/O Cable Max. 2.0mm
0.8Nm (7lb-in)
60g
12mm x 99mm x 70mm
Refer to 'Environment Specification'
Bit6 Bit5
Analog Input Ch0 Low byte
Analog Input Ch0 High byte
Analog Input Ch1 Low byte
Analog Input Ch1 High byte
Analog Input Ch2 Low byte
Analog Input Ch2 High byte
Analog Input Ch3 Low byte
Analog Input Ch3 High byte
2
(AWG 14)
Analog Input Ch0
Analog Input Ch1
Analog Input Ch2
Analog Input Ch3
Bit4 Bit3
HX-RIO3 Series
Bit2 Bit1 Bit0