Digitus DS-55901 Manual

Digitus DS-55901 Manual

Advertisement

HDMI REPEATER
Manual
DS-55901
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or adjusting
this product. Please keep this manual for future reference.

1.0 INTRODUCTION

This HDMI Repeater extends the length of HDMI cable up to 35M by regenerating
the HDMI signal before it sends the outputs to the HDMI monitor or projector.
Meanwhile, according to the length of HDMI cable the special designed EQ can
be adjusted to reach the best transmission function.
This HDMI Repeater adopts the iron shell for better EMI elimination and it will
clean out the digital noise (sparkles) in your picture. With the unique designed
structure, this repeater can be fixed up with the donated nogs in "L" shape.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-55901 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Digitus DS-55901

  • Page 1 HDMI REPEATER Manual DS-55901 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 INTRODUCTION This HDMI Repeater extends the length of HDMI cable up to 35M by regenerating the HDMI signal before it sends the outputs to the HDMI monitor or projector.
  • Page 2 1.1 FEATURES This kind of the HDMI Repeater has many features that enable it to perform in a superior manner. Among those features you will find: Support HDMI HighSpeed (1.3b)  Support highest video resolution 1080p  Support 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth ...
  • Page 3 External power supply (optional power DC 5V/2A - DC connector 5.5x2.1 mm supply unit) Power consumption (Max) Note: Specifications are subject to change without notice. 3.0 Package Contents Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton: 1x HDMI Repeater ...
  • Page 4 5.0 CONNECTION AND OPERATION 1) Connect the output of the source device into the input of HDMI Repeater and connect the output to the HDMI display unit. The HDMI Repeater is put close to the HDMI display unit (Input cables are optional) *Please refer to connection diagram section.

Table of Contents