Page 3
•This machine must be operated on a clean sturdy • Should the machine malfunction or should any part • Robot Coupe can in no way be held responsible for counter or table. Keep the area around and under the be damaged, it must not be operated until it is repaired the user’s failure to follow the basic rules of cleaning and...
CONTENTS WARRANTY USES AND CHOICE OF DISCS CLEANING IMPORTANT WARNING MAINTENANCE INTRODUCTION TO YOUR NEW VEGETABLE PREPARATION MACHINE • Blades, plates and graters CL 50 • CL 50 Ultra “E” Version • CL 51 SAFETY SWITCHING ON THE MACHINE • Advice on electrical connections TECHNICAL DATA ASSEMBLY...
Page 5
ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY THE FOLLOWING ARE NOT COVERED Commercial equipment use is defined as but not limited to the preparation of food substance within the confines of a YOUR NEW ROBOT COUPE COMMERCIAL UNDER WARRANTY:...
• Should the machine malfunction or should any part •This machine must be operated on a clean sturdy • Robot Coupe can in no way be held responsible for be damaged, it must not be operated until it is repaired counter or table.
INTRODUCTION TO YOUR "Optional" emptying arm for fine ASSEMBLY grating and slicing only (cabbage, NEW VEGETABLE PREPARATION celery, carrots, cheese, etc.). • CL 51 MACHINE CL 50 • CL 50 Ultra SIDE A facing upwards (ejection “E” Version • CL 51 rib downwards) for any vegetables The CL 51 comprises of two removable parts: the or citrus fruit which require careful...
Place the dicing grid in 3) Position the feed head of the vegetable prepara- 3) When fitting dicing equipment, we recommend that you clean the inside of the bowl with a damp the bowl of the vegetable tion machine on the motor base. processor.
USING THE LARGE HOPPER SAFETY FRENCH FRIES Always press the vegetables down with a pusher to F 8x8 potato 5/16” x 5/16” improve cutting efficiency. W A R N I N G F 10x10 potato 3/8” x 3/8” SLICERS The cutting plates are very sharp. Wear cut resistant gloves when handling the plates.
Page 10
SERVICE See warranty first then; Should your unit require service, check with your distributor to see where local service is available. If not or if you wish your unit to be serviced at the factory, call for return instructions and ship the unit prepaid to our factory address.
Need help?
Do you have a question about the CL 50 e and is the answer not in the manual?
Questions and answers