Advertisement
Advertisement
Table of Contents
Related Manuals for Robot Coupe CL 50 Ultra E
Summary of Contents for Robot Coupe CL 50 Ultra E
- Page 1 CL 50 E • CL 50 Ultra E...
-
Page 2: Table Of Contents
SUMMARY WARRANTY MAINTENANCE • Blades, plates and graters IMPORTANT WARNING TECHNICAL SPECIFICATIONS • Weight INTRODUCTION TO YOUR NEW • Dimensions VEGETABLE PREPARATION MACHINE • Working height CL 50 • CL 50 Ultra “E” Version • Noise level • Electrical data SWITCHING ON THE MACHINE •... -
Page 3: Warranty
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements for SHIPPING DAMAGES. Visible and latent blades which have become blunt, chipped or defects are the responsibility of the freight carrier. Your new ROBOT-COUPE appliance is war- worn after a normal or excessive period of use. The consignee must inform the carrier and consi- ranted to the original buyer for a period of gnor immediately, or upon discovery in the case... -
Page 4: Important Warning
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING : In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. -
Page 5: Introduction To Your New
INTRODUCTION TO YOUR • CL 50 /CL 50 Ultra SINGLE-PHASE Swap either : and the NEW CL 50 • CL 50 Ultra and the ROBOT-COUPE CL 50/CL 50 Ultra are fitted with and the various types of motors : 230 V / 50 Hz / 1 “E”... - Page 6 b) You have chosen a dicing unit: c) If you want to use the French fries potatoes 3) Position the head of cutting equipment: the vegetable prepara- i.e. a grid and a special slicing disc for diced vege- tion machine on the tables.
-
Page 7: Uses And Choice Of Discs
USING THE WIDE FEED OPENING 4) Fit the discharge plate, disc or dicing equipment FRENCH FRIES as indicated in“assembly procedures” in points 1) Fill the feeder right up to the top with vegetables. potato F 8x8 and 2). Apply a downwards pressure on the pusher potato F 10x10 and maintain it until all the vegetables have been... -
Page 8: Maintenance
MAINTENANCE CL 50 Ultra Three-phase machine Power Intensity Speed • BLADES, PLATES AND GRATERS Motor (rpm) (Amp) (Watts) The blades on the slicing discs, the plates on the julienne discs and the graters are all wearing parts, 400 V/50Hz which have to be changed every so often to ensure 220 V/60Hz high quality cutting. - Page 9 The CL 50/CL 50 Ultra is fitted with a temperature fuse which automatically stops the motor if the machine is left on for too long or overloaded. If this happens, allow the machine to cool completely before restarting. R E M E M B E R Never try to override the locking and safety systems.
- Page 18 MADE IN FRANCE BY ROBOT-COUPE Export Department Tel. : + 33 1 43 98 88 33 - Fax : + 33 1 43 74 36 26 48, rue des Vignerons - BP 157 94305 Vincennes Cedex - France http://www.robot-coupe.com - email : international@robot-coupe.com We reserve the right to alter at any time without notice the technical specifications of this appliance.
Need help?
Do you have a question about the CL 50 Ultra E and is the answer not in the manual?
Questions and answers