Honda ARX1200T3 2004 Owner's Manual page 156

Spark Plugs
(5)
(5) spark plug gap
5. Inspect the electrodes and center porcelain
for deposits, corrosion, or carbon fouling.
If the corrosion or deposits are heavy,
replace the plug.
6. Make sure that a 1.0 mm wire-type feeler
gauge cannot be inserted between the spark
plug gap (5). If the gauge fits in the gap,
replace the plug with a new one.
7. With the plug washers attached, thread the
spark plugs in by hand to prevent cross-
threading.
148
Servicing Your Honda
8. Tighten each spark plug:
• about 1/8-1/4 turn after it seats (if the old
plug is good).
• about 1/2 turn after it seats (if installing
a new plug).
NOTICE
Improperly tightened spark plugs can damage
the engine. Too loose, you can burn a piston.
Too tight, you can damage the threads.
9. Reinstall the ignition coils and bolts, and
connect the ignition connectors.
10. Install both seats.