JVC InteriArt HV-53PRO/-A Instructions Manual page 19

COLOUR SYSTEM
The colour system is chosen
automatically. However, if the
picture is not clear or no colour
appears, choose the colour
system manually.
1 Choose COLOUR SYS-
TEM, then press the
MENU/OK button.
COLOUR SYSTEM
PAL
OK :OK
:EXIT
TV
:BACK
DISP
2 Press the buttons to
/
choose the appropriate
colour system. Then press
the MENU/OK button.
•When changing to the
COLOUR SYSTEM of the SUB-
picture, see "Change the
colour system of the SUB-
picture" on page 13 for details.
•You can also operate the
COLOUR SYSTEM function
with the COLOUR SYSTEM
button on the remote control.
For details, see "COLOUR
SYSTEM button" on page 11.
ZOOM
You can change the screen size
according to the picture aspect
ratio. Choose the optimum one of
two ZOOM modes.
1 Choose ZOOM, then
press the MENU/OK
button.
ZOOM
REGULAR
ZOOM
:OK
OK
:EXIT
TV
DISP :BACK
2 Press the buttons to
/
choose a ZOOM mode.
Then press the MENU/OK
button.
The picture expands and the
chosen ZOOM mode is dis-
played in about 5 seconds.
•You can choose a ZOOM
mode from REGULAR or
ZOOM modes. For details, see
"ZOOM button" on page 9.
•You cannot select the ZOOM
function when receiving the
Progressive Video Signal
(525P signal).
DIGITAL
CONVERGENCE
If red, green, and blue shadows
appear around the contours of the
image on the screen it is neces-
sary to adjust CRT colour conver-
gence. For details, refer to "Adjust-
ing CRT colour convergence" on
Page 6.
Using the TV's menu
19