Table of Contents
Advertisement
Programme
Machine Care
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com
7. BASIC SETTINGS
You can configure the appliance by
changing basic settings according to
your needs.
Number Settings
1
2
3
4
5
6
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
Water (l)
1)2)
Values
Water hardness From level 1L to
level 10L (de‐
fault: 5L)
Rinse aid empty
On (default)
notification
Off
End sound
On
Off (default)
Auto door open
On (default)
Off
Key tones
On (default)
Off
Latest pro‐
On
gramme selec‐
Off (default)
tion
Energy (kWh)
9.9
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your area.
Activate or deactivate the rinse aid indica‐
tor.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the but‐
tons when pressed.
Enable or disable the automatic selection
of the most recently used programme and
options.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
Duration (min)
0.655
1)
ENGLISH
11
60
Advertisement
Table of Contents
