Seecode 20329 Instructions Manual page 9

- AIR level: high air speed with low temperature.
- LOW setting: lower air speed with medium temperature
- High level: high air speed with high temperature
As a general guideline, use the high air speed setting for
fast drying on thick hair and the weaker setting for fine and
precise control when styling.
Recommendation
Step 1:
Gently towel dry your hair to remove excess moisture.
Step 2:
Divide the hair into several sections. Start with a lowest
setting first to check which temperature is most suitable for
your scalp and hair.
Step 3:
Place the SEECODE hot air brush close to the hair root and
brush out towards the end of the hair.
Step 4:
For long and thick hair, the brush should be placed under the
hair near the roots and rolled to the ends of the hair.
Step 5:
To give the hair extra lift at the roots, hold the brush under the
roots for about 2 to 3 seconds.
If you want the curls to curl inwards, place the hairbrush
under the ends of the hair for about 2 to 3 seconds and twist
the hair inwards with the brush.
To curl hair outwards, place the brush at the ends of the hair,
hold it there for about 2 to 3 seconds and then turn the hair
outwards with the brush.
High
Low
Air
Off