Installation And Commissioning - Fiap profifeed PendulumFeeder Instructions For Use Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

The combination of water and electricity can lead to serious danger to life and limb if

it is not connected properly or handled improperly. Only operate the device when there

are no people in the water! Before reaching into the water, always unplug all devices in

the water. Compare the electrical data of the power supply with the type plate on the

packaging or on the device. Make sure that the device is protected by a residual current

device with a rated residual current of maximum 30 mA. Only operate the device from

a properly installed socket. Keep the power plug and all connection points dry! Lay the

connection cable in a protected manner so that damage is impossible. Only use cables,

installations, adapters, extension or connection lines with protective contact that are

approved for outdoor use. Do not carry or pull the device by the connecting cable! The

device must not be operated if the cable or housing is defective! If the power cord of the

device is damaged, the device must be disposed of; it is no longer possible to replace the

power cord. If the cable is damaged, the device must be disposed of. Electrical installati-

ons in fish processing companies must comply with international and national installation

regulations. Never open the housing of the device or its associated parts unless this is

expressly stated in the instructions for use.

Never make technical changes to the device, this leads to the immediate expiry

of all warranty and guarantee claims.

Use only original spare parts and accessories. Have repairs carried out only by authori-

zed customer service centers.

If you have any questions or problems, please contact a qualified electrician for your own

safety!