Page 1
GM710A-YF A/C Service Station GM710A-YF A/C Service Station...
Page 2
GM710A-YF A/C Service Station Safety The machine is designed to be used and repaired by qualified personnel only. The machine designed for use in recovering the R12, R134a or R1234yf refrigerant fluid used in the air-conditioning (A/C) systems of motor vehicles. Fill the A/C system with the quantity of refrigerant recommended by the manufacturer.
GM series A/C system maintenance equipment is with the latest design technique which uses the best control principle and the manufacturing process. GM710A-YF A/C Service Station is intelligent equipment collecting of the A/C recovery, recycling, recharging and other functions in one. It’s with the beautiful shape, humanized operation interface, and advanced manufacturing processes to make the A/C maintenance professional and simple.
GM710A-YF A/C Service Station 3. Operation 1) Parts descriptions HP gauge Displayer LP gauge Operation panel P gauge HP port Auxiliary Port LP port Switch for Service Port for Switch for new oil adding Dry-filter used oil discharge Used oil bottle...
GM710A-YF A/C Service Station 2) First use A、 Open the back door and unscrew the electronic scale support screw before using the equipment. And also take out all of the Protective filler. Unscrew support screw. From the back. B、Please supply about 3 kg refrigerant into the tank of equipment so that all of the functions can be run normally.
GM710A-YF A/C Service Station C、If it displays code as F00- during the process, please deal with it according to prompt information. D、Notice: The used oil can be drained out automatically or by manual. Note: Press in recovery function. It will purify the non-condensable gas “...
GM710A-YF A/C Service Station A、The recharging amount setting: Method 1: Set the amount directly. Method 2: Set the amount by the database. Steps as following: Press Note: In the recharging process, if shows the menu, it B、 ENTER means that you need to turn on the car air-conditioning to complete the recharging process.
GM710A-YF A/C Service Station 11) Subsidiary functions A- Usage of the Auxiliary Port Recharging from cans a) Before vacuum, connect the pipe with the external tank to the auxiliary port. Note: the connector to the auxiliary port must be with thimble. Do not open the valve of external tank during this process.
GM710A-YF A/C Service Station When finished, please close the valve of the refrigerant tank and run the recovery function. E-Exchange dry filter A、The dry filter must be exchange when it reaches the life time. There will give a message. B、If not exchange the dry-filter timely, it will not be able to run the recovery and supplying functions.