Toshiba TDDP2213ES2 User Manual page 7

CAUTION
Clean your unit occasionally to keep it looking new. Be sure to unplug the unit before
cleaning to prevent shock or re hazards.
Key Pad Features
Comfort dehumidifying
operation on indicator light
lter Bucket full
indicator indicator
light light
Pump models
only
NOTE
The appearance of the control panel may vary slightly by model.
Control Pads
When you push the button to change operation
modes, the unit will make a beep sound to indicate
that it is changing modes.
PUMP Button(Pump models only)
Press to activate the pump operation.
NOTE: Make sure the pump drain hose is installed
into the unit and the continuous drain hose is
removed from the unit before the pump
operation is activated. When the bucket is full, the
pump starts to work. Refer to the next pages for
removing the collected water. Do not use this
operation when the outdoor temperature is equel
to or less than 0ºC (32ºF).
COMFORT Button
Press to activate the COMFORT
dehumidifying operation. The dehumidifier will
automatically set to a preset humidity
and fan level. To exit comfort mode, adjust
the humidity to desired level.
User Manual
Continuous operation
on indicator light
Auto defrost
operation
on indicator
light
FILTER Button
This feature is a reminder to clean the Air Filter
for more
To reset after cleaning the ter, press
the Filter button and the light will go o .
CONT (continuous) Button
Press to activate the continuous dehumidifying
operation.
When CONTINUOUS function is turned on,
set humidity level is automatic and cannot
be changed manually.
High fan Timer on/
indicator
light indicator
light
operation. The LED (light)
NOTE
LED
Display
peration.
Page 7