Table of Contents
Advertisement
Installing Batteries
1. Remove the battery cover from the bottom of the unit.
2. Install 4 new AA batteries, observing proper +/- polarities,
as indicated in the battery compartment. (See Fig. 1)
3. Replace the battery cover and lock into position.
4. Turn the ON/OFF switch to the ON position.
Figure 1
Replacing Bulb
CAUTION: TURN OFF THE POWER AND UNPLUG. ALLOW
BULB TO COOL AT LEAST THREE MINUTES BEFORE REPLAC-
ING IT.
Advertisement
Table of Contents
Need help?
Do you have a question about the CA811 and is the answer not in the manual?