Table of Contents
Advertisement
1. Plug the adapter into any standard wall outlet (120V AC).
2. Turn the ON/OFF switch to the ON position.
1. Remove the battery cover from the bottom of the unit.
2. Install 4 new AA batteries, observing proper +/- polarities, as
indicated in the battery compartment. (For an illustration, see
"Operating Instructions.")
3. Replace the battery cover and lock into position.
4. Turn the ON/OFF switch to the ON position.
To adjust the angle of the mirror, carefully move the mirror head
until the desired position has been reached.
Quick Start
Using the Adapter
Using Batteries
Adjusting Mirror
Advertisement
Table of Contents
