Panasonic CQ-D5501U Operating Instructions Manual page 30

E
Troubleshooting
N
G
L
I
S
H CD
57
Problem
The disc is inserted upside down.
aInsert a disc correctly.
No playback or disc
ejected
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
Sound skipping or There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
noise
The unit is not sufficiently secured.
aSecure the unit to the console box.
Sound skipping due to
vibration
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [OPEN] for more than 2 seconds when the face plate
is open (disc forced ejection). In case that the disc forced ejection does
not work, consult your dealer.
Disc unejectable
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
MP3
Problem
The disc has unplayable formatted data.
No playback or disc
aRefer to the description about MP3 for playable sound data except CD-
ejected
DA (i.e. music CD).
The playability of some CD-R/RWs may depend on the combination of media,
The CD-R/RWs that are
recording software and recorder to be used even if these CD-R/RWs are
playable on other
playable on other devices such as a PC.
devices are not
aMake CD-R/RWs in a different combination of media, recording software
playable on this unit.
and recorder after referring to the description about MP3.
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc. For MP3, refer to the
Sound skipping or
description about MP3.
noise
Playing VBR (Variable Bit Rate) files may cause sound skipping.
aPlay Non-VBR files.
Note:
¡Refer to "Notes on MP3". (a Page 26)
58
CQ-D5501U
(continued)
Possible cause a Possible solution
Possible cause a Possible solution
DVD/VCD
Problem
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
No playback or disc
ejected
The disc has unplayable formatted data.
aRefer to the description about available disc types.
Sound skipping or There is a flaw or foreign objects on the disc.
noise aRemove the foreign objects, or use a flawless disc.
The unit is not sufficiently secured.
aSecure the unit to the console box.
Sound skipping due to
vibration
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Something such as a peeled label obstructs the disc coming out.
aPress and hold the [OPEN] for more than 2 seconds when the face plate
is open (disc forced ejection). In case that the disc forced ejection does
not work, consult your dealer.
Disc unejectable
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
Cables are not correctly connected.
The picture does not
aConnect cables correctly.
appear on the monitor.
aStop the car and apply the parking brake.
The video signal setting of this unit (NTSC/PAL) does not match with the
The picture appears
video signal setting of the connected monitor.
incorrectly.
aMake the same setting between this unit and the monitor.
Video CD menu play- aVideo CD menu playback works only when playing a video CD that has
back does not work.
the playback control feature.
The picture becomes
distorted while fast for- aA certain amount of distortion is normal.
warding or reversing.
Subtitle must be recorded on the disc, or they will not appear.
No subtitles appear.
aRefer to the guide provided with your disc.
It is difficult to hear small
sounds. (Dolby digital aSet "D.Range Compression" to "Minimum".
DVD software only)
It is not possible to switch if the disc does not have multiple audio lan-
Cannot switch the guages/subtitle languages/angles recorded on it.
audio language/subti- aRefer to the guide provided with your disc.
aSome discs permit switching through a menu screen.
tle language/angle.
aSometimes, switching angle is possible only with certain scenes.
The audio/subtitle lan- If audio or subtitles in that language are not recorded on the disc, the audio or
guage selected in the subtitles do not switch to that language. (Some discs permit switching
user settings is not through a menu screen.)
aRefer to the guide provided with your disc.
used.
Possible cause a Possible solution
CQ-D5501U
E
N
G
L
I
S
H
58 1
59