Function Settings (Spectrum Analyzer Display Patterns, Mute/Attenuation, Security Function) - Panasonic CQ-D5501U Operating Instructions Manual

E
Function Settings
N
G
L
I
S
H
37
Spectrum Analyzer Display Patterns
Default: Pattern 1
Variety: 6 types, OFF
Mute/Attenuation
You can select mute or attenuation. (a Page 12)
Default: MUTE
Security Function
You can activate the anti-theft function when leaving your car.
Default: ON
38
CQ-D5501U
Turn [VOLUME]. (Press [ ] or [ ] on
} {
the remote control unit.)
Press and hold
[VOLUME] (PUSH
SEL: select) for more
than 2 seconds. (Press
and hold [SEL] for
more than 2 seconds
on the remote control
unit.)
[DISP] (Return to the regular mode)
Press and hold [VOLUME]
(PUSH SEL) for more than 2
seconds to open the menu.
Press [VOLUME] (PUSH SEL) .
Press [VOLUME] (PUSH SEL) .
Regular mode PATTERN
Note:
¡ To return to the regular mode, press [DISP].
¡ If no operation takes place for more than 10 seconds in function setting, the display returns to the regular mode.
Turn [VOLUME].
w q
Turn [VOLUME].
q
w
Turn [VOLUME].
q
w
When the ignition switch is turned OFF...
¡ The security message will be displayed.
¡ The face plate removal alarm will be active.
(a Page 46)
When the face plate is removed...
¡ The security indicator (SLED) blinks.
MUTE KEY SECURITY
: Off
: Pattern 1 (Default)
: Pattern 6
: 10 steps decrease (Attenuation)
: No sound (Mute) (Default)
The security function is activated. (Default)
The security function is not activated.
SLED (Security Light Emitted Diode) ON
(a Page 46)
CQ-D5501U
E
N
G
L
I
S
H
38 1
39