Page 1
Instructions INSTRUCTIONS an LDI Spaces Company INSTRUCCIONES Minneapolis, MN 55428 www.safcoproducts.com 1876 Machine Stand with Drop Leaves Charrette avec Étagères qui Plient La carreta con Estanter que Pliegan PRODUCT WARRANTY is available online at: www.safcoproducts.com LA GARANTIE DU PRODUIT est LA GARANTÍA DEL PRODUCTO está...
Page 2
TOOLS REQUIRED: Phillips Screwdriver. OUTILS REQUIS : Tournevis À Pointe Cruciforme. HERRAMIENTAS REQUERIDAS: Destornillador Phillips. PARTS LIST / LISTE DES PIÈCES / LISTA DE PIEZAS PART NO. / CODE / QTY. / DESCRIPTION / DESCRIPTION /DESCRIPCIÓN DE PIECE / NO. QUANTITÉ/ CODIGO DE PIEZA...
Page 3
990000009: 3 of 6; Rev A; Rev Date 17-FEB-2016 Safco Products Company, New Hope, MN 55428...
Page 4
Note: Open Ends To Center! Noter: Fins Ouvertes Vers Le Centre! (24) Note: ¡Los Extremos Abiertos Hacia El Centro! Note: Flanges Must Face Each Other! Noter: Les Bourrelets Doivent Faire Face À L’un L’autre! Note: ¡Los Rebordes Deben Enfrentarnos! Lay the A Top and B Side Shelves face down (holes up) on a clean flat surface. Attach the C Leg Brackets to the Top (open end toward the center) , using four D Small Screws per Bracket.
Page 5
Modesty Panel Inside Bracket! Panneau De La Modestie À L’intérieur De Support! ¡El Panel De Modestia Dentro Del Apoyo! Carefully lift the leg assembly (upside down) over the Top (also upside down) and insert the ends of the legs into the Brackets. Be certain that the Modesty Panel slides INSIDE the Bracket (see inset).
Page 6
Back Legs Les Jambes Arrières Las Piernas Traseras Front Legs Les Jambes De Devant Las Piernas Delanteras Screw the stems of the O Casters without Brakes into the rear legs (the ones with the Modesty Panel attached) with hex wrench. Install the P Casters with Brakes into the front legs, and carefully turn the completed unit upright.
Need help?
Do you have a question about the SAFCO 1876 and is the answer not in the manual?
Questions and answers