Panasonic EB-GU87 Operating Instructions Manual page 92

PIN or PIN2
The PIN (Personal
Identification Number)
protects your SIM
against unauthorized
use. When enabled,
you must enter the PIN
every time you turn on
the phone.
PIN2 controls security
for Fixed Dial Store,
Call Charge Metering
and Barred Dial.
Dial Only PhBook
Restricts dialing to
numbers stored in the
phonebook.
Requires PIN2 code.
No SIM PhBk Dial
Prohibit manual dialing
of pre-programmed
phone numbers in the
SIM Phonebook.
Requires PIN2 code.
88 Options & Timers Menu
In Options & Timers Menu
1. Scroll to Security, press
2. Scroll to PIN or PIN2, press
3. Scroll to desired option, press
Scroll to Enable (PIN/PIN2 protection on) or Disable
(no PIN/PIN2 protection), press
Enable/ digit PIN/PIN2, press
Disable
If you set Enable, enter PIN/PIN2 and press
every time you turn on phone.
Enter PIN/PIN2, press
Change
PIN/PIN2, press
Code
press
Note: If PIN/PIN2 is entered incorrectly 3 times, the phone locks.
Contact your wireless service provider for a PUK/PUK2 code. If
the PUK/PUK2 code is entered incorrectly 10 times, the phone
will not operate. All information stored in the SIM card is lost and
the SIM card must be replaced.
In Options & Timers Menu
1. Scroll to Security, press
2. Scroll to Dial Only PhBook, press
3. Scroll to Enable or Disable, press
4. Enter PIN2, press
Note: When Dial Only PhBook is enabled, any
manually dialed phone number must match a stored
phone number. Phone numbers can be added, edited
or deleted as normal, but you will be prompted for
PIN2.
In Options & Timers Menu
1. Scroll to Security, press
2. Scroll to No SIM PhBk Dial, press
3. Scroll to Enable or Disable, press
4. Enter PIN2, press
...
.
.
.
. Enter new 4- to 8-digit
. Enter new PIN/PIN2 again,
.
...
.
.
...
.
.
.
. Enter 4- to 8-
.
.
.
.