Klarstein MAGNICHEF 4 Manual page 41

Installing the holder
1. Place the unit on a stable, smooth surface (the packaging can be used). Do not
apply force to the protruding controls.
2. After installation, secure the hob to the worktop using the screws and the four
brackets on the underside of the hob (see illustration).
3. Adjust the position of the holders to the thickness of the worktop.
Hob
Holder
Electrical connection
• Disconnect the unit from the power supply.
• Installation must be carried out by qualified personnel who are familiar with
the applicable safety and installation regulations.
• The manufacturer declines all liability for personal injury, animal harm or
damage to property resulting from failure to comply with the regulations set
out in this chapter.
• The mains cable must be long enough to allow the hob to be removed from
the worktop.
• Make sure that the voltage indicated on the rating plate on the bottom of the
appliance matches the household voltage.
Worktop
Hob
Holder
Worktop
EN
41