USB of a computer to RS-232 equipments. USA-FTDI-36 is a universal USB/RS-232 interface converter. No external power supply needed. Compatible with USB and RS-232 standards, USA-FTDI-8 is capable to perform the conversion from single-ended USB signal into UART signal of RS-232.
1. Pin assignment of RS-232C DB9M (PIN) RS-232C Data Carrier Detect (DCD) Receive Data SIN (RXD) Transmit Data SOUT (TXD) Data Terminal Ready (DTR) Signal Ground (GND) Data Set Ready (DSD) Request to Send (RTS) Clear to Send (CTS) Ring Indicator (RI) gearmo.com/support...
1. USB-A type: USB signal input and pin assignment 1. VCC 2. DATA-(DM) 3. DATA+(DP) 4. GND Product Dimension & Connection Diagram 914.4mm 1. Standard USB A-type male connector 2. Fine Shell (Black) 3. MCU adopts the product of British FTDI company 4. Standard DB9 male connector gearmo.com/support...
Check receive indicator and see if it flashes f. Check send indicator and see if it flashes 2. Data missing or incorrect a. Check to see whether the data rate and format at both ends of the communication equipment is consistent. gearmo.com/support...