Table of Contents
Advertisement
RECO RD
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
4
5
6
8
7
9
/
0
4
2
1
3
¡
¶
7
8
PAU SE
1
4
¢
3
N O TES:
● The B.E.S.T. system works only after a tape has been inserted
and the Record mode is first initiated. It does not work during
recording.
● In the case of timer recording, the B.E.S.T. system works
before recording is initiated.
● Once the cassette is ejected, the B.E.S.T. data is cancelled.
2
3
The next time the cassette is used for recording, B.E.S.T. is re-
performed.
q
5/8
6
ATTEN TIO N :
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after
RECO RD and PLAY on the remote are pressed, or RECO RD
on the recorder is pressed. To make sure you record the
desired scene or programme in its entirety, first perform the
following steps:
1) Press and hold PAU SE and RECO RD to engage the
RECORD PAUSE mode.
● The recorder then automatically checks the condition
of the tape and, after approximately 7 seconds, re-
enters RECORD PAUSE.
2) Press PLAY to start recording.
● If you want to bypass the B.E.S.T. system and begin
recording immediately, set " B.E.S.T." to " OFF" in step
5 on page 12.
Pla yba ck
The recorder assesses the quality of the tape once you initiate
playback.
When watching a tape recorded with " B.E.S.T." set to " ON" , it is
recommended that you leave B.E.S.T. on during playback as well.
ST ART PLAYBACK
1
Press PLAY .
● The recorder adjusts the playback picture quality
● B.E.S.T. is active during Auto Tracking. " BEST"
N O TES:
● When watching a rental tape or one recorded on another
video recorder, or when using this recorder as the player for
editing, set B.E.S.T. to your preference by performing steps 2
through 6 on page 12.
● "BEST" only appears at the beginning of automatic tracking.
Even though it doesn't appear after that, the B.E.S.T. function
is operative.
based on the quality of the tape in use.
appears blinking on the recorder's display panel.
13
EN
Advertisement
Table of Contents
