Playing Discs - Panasonic DVD-LX110 Operating Instructions Manual

Playing discs

1
Open the lid.
OPEN
2
Insert a disc and
close the lid.
Click into
place
Load double-sided discs so
the label for the side you
want to play is facing up.
DVD-RAM: Remove discs from
their cartridges before use.
Some discs start to play
automatically when the unit is on.
To play [JPEG], [MP3] or [MPEG4] on DVD-RAM that contain both [DVD-VR] and another format (e.g.
[JPEG]), select "Play as Data Disc" (➜ page 27, Other Menu).
While stopped, the unit automatically turns off once 15 minutes (after approximately 5 minutes when
using the battery pack) have elapsed.
Discs continue to rotate while menus are displayed. Press [ , – OFF] when you finish to preserve the unit's motor.
Total title number may not be displayed properly on
If you are experiencing problems, refer to troubleshooting guide (➜ page 36).
Main unit operations
ON
OFF
12
12
Headphone terminals [ ]
3.5 mm (1/8 ) stereo mini jack
3
Press and hold.
ON
The unit turns on and play begins.
When "SD" or "AUX" is displayed,
press [AV SELECT] several times
until "DISC" is displayed.
(Playing SD cards➜ page 14/
Watching video from other
equipment ➜ page 33)
R/ RW.
When the unit is off:
Press and hold and the power comes on and play
begins.
Turn unit on/play
When the unit is on:
Press and play begins.
Pause Press [ , ON] to restart play.
The position is memorized when "Press PLAY to
resume play" appears on the screen.
Press [ , ON] to resume. (Resume play)
Stop
Opening the disc lid, or pressing [ , – OFF] while
"Press PLAY to resume play" appears on the
screen cancels the memorized position.
Turn unit off Press and hold until "OFF" is displayed.
AV SELECT
4
Adjust the volume.
VOL
When using headphones,
turn down the volume before
connection.