Installation; Clean Before Use; Completing Installation - HomeValet 001T Instruction Manual

Table of Contents

Advertisement

INSTALLATION

DANGER: Suffocation Hazard
To avoid danger of suffocation, keep plastic bag
DANGER
and other packing material away from babies, children
and household pets. Do not use this bag in cribs, beds,
carriages or playpens. The plastic bag could block nose and mouth
and prevent breathing. Tear up bag before throwing it away. This
bag is not a toy.
Failure to follow these instructions can result in death or brain
damage.
WARNING: Excessive Weight Hazard
Use two or more people to move and install Smart Box.
WARNING
Failure to do so can result in back or other injury.

Clean Before Use

DANGER: Electrical Shock Hazard
Ensure that the power is disconnected before
DANGER DANGER
cleaning.
Failure to follow these instructions can result in death, electric shock
or personal injury.
DANGER: Explosion Hazard
Use nonflammable cleaner.
DANGER DANGER
Failure to do so can result in death, explosion or fire.
IMPORTANT:
Do not tilt or tip the Smart Box during cleaning.
Use only dampened cloths to wash and rinse the Smart Box.
Do not fill the Smart Box with water or use a garden hose for
cleaning. There is no drain plug. Water could enter the compressor
compartment, which would affect operation.
Clear area immediately surrounding the Smart Box regularly. The
air vents must be kept clear of debris and other obstructions.
12
After removing all packing materials, save the Instruction Manual
and clean the interior compartment in preparation for completing the
installation.
1.
Wash the interior of the Smart Box using a soft cloth dampened
with a solution of mild dish soap and warm water.
2.
Rinse using a soft cloth dampened with clear, warm water.
3.
Dry the interior thoroughly using a soft cloth.

Completing Installation

CAUTION: Instability Hazard
To avoid tipping or other instability of the
CAUTION CAUTION
appliance, it must be installed in accordance with
the instructions in this manual.
IMPORTANT:
When moving the Smart Box to its final location, do not tilt it
beyond 30° from upright. Do not rest the Smart Box on either of
its ends, its sides, or upside down (even briefly). Doing so may
damage the cooling unit.
Before plugging the Smart Box into a GFCI-protected electrical
outlet, allow 2 hours for the refrigerant to settle, if the unit was
moved on its side.
The compressor has a safety shutoff which may delay its start
if it is cycled on and off too frequently. Allow several minutes
to elapse between unplugging the Smart Box power cord and
plugging it back into the GFCI-protected electrical outlet to avoid
damaging the Smart Box.
DANGER Electrical Shock Hazard
Plug into a GFCI-protected electrical outlet.
DANGER DANGER
Do not remove the ground prong from the power
cord plug.
Do not use an adapter or an extension cord.
Do not use a damaged power supply cord or one that has been
entrapped during installation. The power cord must be replaced
by the manufacturer, its service agent or similarly qualified
persons.
Failure to follow these instructions can result in death, fire or
electrical shock.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

002cm002cme

Table of Contents