Advertisement
SPECIFICATIONS
Input Connections:
Output Connections:
Frequency Response:
Dynamic Range:
Tube Type
THD:
CMRR:
Maximum Input Level:
Maximum Output Level:
Low Cut Filter:
Input Impedance:
Output Impedance:
Maximum Gain:
Phantom Power:
Chassis Type:
Power Requirements:
Dimensions:
Weight:
ART maintains a policy of constant product improvement.
Therefore, specifications are subject to change without notice.
Go to
www.artproaudio.com
Go to
www.antarestech.com
XLR-Female balanced or ¼-inch unbalanced
XLR-Male balanced and ¼-inch unbalanced
20 Hz – 20 kHz, +/-1dB (typical)
>104dB A-weighted
Hand Selected 12AX7A (x1)
<0.05% (typical)
>60dB (typical)
+16dBu (¼-inch), +15dbu (XLR), +16dBu (Insert)
+18dBu (¼-inch), +24dbu (XLR), +16dBu (Insert)
Switchable, –3dB @ 100 Hz
5.5k Ohm(balanced XLR), 1M Ohm(unbalanced ¼-inch)
600 Ohm(balanced XLR), 300 Ohm(unbalanced ¼-inch)
Switchable, +66dB (balanced in-out)
Switch selectable, +48Volts DC, filtered, current limited
Aluminum anodized with integral/stackable rubber sides
9VAC @ 700mA (typical)
9VAC @ 1000mA supply included with product
1.75inch H x 5.9inch W x 6.5inch D
44.5mm x 150mm x 165mm
2.5 lbs. (1.14 kg)
Note: 0 dBu = 0.775Vrms
for the latest information and on the Auto-Tune Pre.
for more information on Antares® and Auto-Tune®.
10
Advertisement
