Dakota Micro RazerCam CVBS 170 User Manual

Dakota Micro RazerCam CVBS 170 User Manual

Ntsc (pal) camera

Advertisement

Camera Specifications

Description
Part Numbers
Video System
Video Type
Image Pick-up Device
Horizontal Resolution
Minimum Illumination
Image Ratio
Auto Gain Control
Scanning System
Camera Board Lens
Operating Temp
Construction
Waterproofing Criteria
Dimensions
Camera Connector
LED Lighting
Warranty Period

Camera Installation Instructions

1. The opening size for camera mounting should be
1.38in (35.1mm). The perfect hole drill bit size is a
1 3/8 or 35mm. While not perfect, a 1 7/16 or
37mm will work.
2. Make sure that your camera is mounted so that
the word "RazerCam" is right side up.
3. Tighten hex nut to hold the camera in place.
4. Near the 5-pin connector on your camera is a
small loop of green wire. This wire is your
mirroring switch. When the circuit is complete
(intact) your camera image is mirroring. When
this circuit is incomplete (cut) your camera is
forward-facing. It is recommended to place shrink
wrap or electrical tape over the exposed wire
ends to prevent shorts. If utilizing a Dakota Micro
monitor your camera can also be mirrored from
the monitor. Your camera will need to be
rebooted (powered on/off) for this switch to take
effect.
5. Your RazerCam™ camera has an IR array that
outputs visible white light. If you mount this
camera close to another light source, your viewing in darkened environments will be increased.

Camera Warnings

NEVER RELY ON YOUR DAKOTA MICRO CAMERA AS A SAFETY FEATURE. It is up to your discretion to keep your road travel and other operations
safe. Your Dakota Micro camera will provide you with information only based on what it sees. Operation of machinery safety guidelines still
apply.
Dakota Micro, Inc. cameras are equipped with an array of light emitters which are visible to the human eye. This feature will aid in low light
conditions but has limitations. The effective range of the night vision feature is 1 to 75+ feet. DO NOT ATTEMPT TO DRIVE MACHINERY USING
THIS FEATURE.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
AU: SJE
User Manual
RazerCam™ CVBS 170° NTSC (PAL) Camera
This RazerCam™ kit includes one (1) CVBS 170° camera
DMRZ-LC (NTSC) or DMRZ-LCP (PAL)
NTSC or PAL
CVBS
CMOS
480P
0.01 LUX@F1.2
16:9
Automatic based on lighting
Progressive
170° Field of View
-4°F (-20°C) – 158°F (70°C)
Aluminum Case
IP69K
1.76in(44.7mm) (W) x 1.09in(27.7mm) (D)
5 pin Conxall/ Switchcraft
Visible White Light
1 Year
BY: SJE
V3
REV: 04/13/23
User Manual DMRZ-LC(P)
Page 1 of 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RazerCam CVBS 170 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dakota Micro RazerCam CVBS 170

  • Page 1 Dakota Micro, Inc. cameras are equipped with an array of light emitters which are visible to the human eye. This feature will aid in low light conditions but has limitations. The effective range of the night vision feature is 1 to 75+ feet. DO NOT ATTEMPT TO DRIVE MACHINERY USING THIS FEATURE.
  • Page 2 Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of five (5) years for AgCam®...

Table of Contents