Dakota Micro RazerCam CVBS 120 User Manual

Dakota Micro RazerCam CVBS 120 User Manual

Ntsc (pal) camera

Advertisement

Camera Specifications

Description
Part Numbers
Video System
Video Type
Image Pick-up Device
Horizontal Resolution
Minimum Illumination
Image Ratio
Auto Gain Control
Scanning System
Camera Board Lens
Operating Temp
Construction
Waterproofing Criteria
Dimensions
Camera Connector
LED Lighting
Warranty Period

Camera Installation Instructions

1. The opening size for camera mounting should be
1.38in (35.1mm). The perfect hole drill bit size is a 1
3/8 or 35mm. While not perfect, a 1 7/16 or 37mm
will work.
2. Make sure that your camera is mounted so that the
word "RazerCam" is right side up.
3. Tighten hex nut to hold the camera in place.
4. Near the 5-pin connector on your camera is a small
loop of green wire. This wire is your mirroring switch.
When the circuit is complete (intact) your camera
image is mirroring. When this circuit is incomplete
(cut) your camera is forward-facing. It is
recommended to place shrink wrap or electrical tape
over the exposed wire ends to prevent shorts. If
utilizing a Dakota Micro monitor your camera can also
be mirrored from the monitor. Your camera will need
to be rebooted (powered on/off) for this switch to
take effect.
5. Your RazerCam™ camera has an IR array that outputs
visible white light. If you mount this camera close to another light source, your viewing in darkened environments will be increased.

Camera Warnings

NEVER RELY ON YOUR DAKOTA MICRO CAMERA AS A SAFETY FEATURE. It is up to your discretion to keep your road travel and other operations
safe. Your Dakota Micro camera will provide you with information only based on what it sees. Operation of machinery safety guidelines still
apply.
Dakota Micro, Inc. cameras are equipped with an array of light emitters which are visible to the human eye. This feature will aid in low light
conditions but has limitations. The effective range of the night vision feature is 1 to 75+ feet. DO NOT ATTEMPT TO DRIVE MACHINERY USING
THIS FEATURE.
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.
AU: SJE
User Manual
RazerCam™ CVBS 120° NTSC (PAL) Camera
This RazerCam™ kit includes one (1) CVBS 120° camera
DMRZ-LC (NTSC) or DMRZ-LCP (PAL)
NTSC or PAL
CVBS
CMOS
480P
0.01 LUX@F1.2
16:9
Automatic based on lighting
Progressive
120° Field of View
-4°F (-20°C) – 158°F (70°C)
Aluminum Case
IP69K
1.76in(44.7mm) (W) x 1.09in(27.7mm) (D)
5 pin Conxall/ Switchcraft
Visible White Light
1 Year
BY: SJE
V3
User Manual DMRZ-LC120(P)
REV: 04/13/23
Page 1 of 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RazerCam CVBS 120 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dakota Micro RazerCam CVBS 120

  • Page 1 Dakota Micro, Inc. cameras are equipped with an array of light emitters which are visible to the human eye. This feature will aid in low light conditions but has limitations. The effective range of the night vision feature is 1 to 75+ feet. DO NOT ATTEMPT TO DRIVE MACHINERY USING THIS FEATURE.
  • Page 2 Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of five (5) years for AgCam®...

Table of Contents